6000K 72W LED Suspended Ceiling Light For Underground Parking ALS-CEI15-33

CE Rosh listed led lighting canada led ceiling lighting  72W used for underground parking ALS-CEI15-33

Specification:

Product Description

Installation:

Ceiling Mounted Installation:

1. Fix the wall frames onto the ceiling and wall by screws.

2. Put the 4 build-in clicks of the lamps on to the screens of the wall frames, and push the lamps forward to the wall frames, clicks will be locked automatically, the installation is completed.

The embedded Installation:

1. After take off the ceilings

2. Complete the installation via exchanging the lamps(make the clicks straight, then put them in the holes of ceilings.

Suspended ceiling Installation:

• Connecting the suspended wires with the clicks of the lamp. And put the ceiling plate into the suspended wires, can control the height of the lamps by pulling the suspended chucks.
• After completed the height controlling, Fixed the 4 suspend chucks on to the ceilings, the installation is completed.

Integration ceiling Installation:

• Installing the keels shelves, and install the buckles one by one, obligating the place for the lamps.
• Connecting the electrical cables, put the lamps into the keels shelves.

Attention:

1 Use indoor or some place where no water, don’t put them in wet or dam place

2 Please check the local voltage compliance product requirements

3 Installed in a well-ventilated place to ensure appropriate environmental temperature

4 When installation, try to avoid the minefields, strong magnetic field and high-pressure region

5 Always turn power off at the circuit breaker before rewiring your fixture

Applications:

1. Commercial and exhibition locations
2. Hotel, conference room
3. Factory, office, house
4. Airport, metro station
5. School, hospital and other public places

Maintenance:

1. Pls don’t repair or maintain the product under condition user lack of professional person or knowledge for circuit,especially in absence of necessary equipment, avoiding extending the damage or breaking down the important components.

2. As there is high voltage circuit inside the product, during maintenance pls don’t dissemble or hand touch the PCB under   power-on condition. There is isolation protection layer on circuit board, pls don’t touch acidic materials when you disassemble the circuit board, like sweat etc. Please use plate washer water to clean the circuit board when there is stain or dust.

Installation:

Ceiling Mounted Installation:

1. Fix the wall frames onto the ceiling and wall by screws.

2. Put the 4 build-in clicks of the lamps on to the screens of the wall frames, and push the lamps forward to the wall frames, clicks will be locked automatically, the installation is completed.

The embedded Installation:

1. After take off the ceilings

2. Complete the installation via exchanging the lamps(make the clicks straight, then put them in the holes of ceilings.

Suspended ceiling Installation:

1. Connecting the suspended wires with the clicks of the lamp. And put the ceiling plate into the suspended wires, can control the height of the lamps by pulling the suspended chucks.

2. After completed the height controlling, Fixed the 4 suspend chucks on to the ceilings, the installation is completed.

Integration ceiling Installation:

1. Installing the keels shelves, and install the buckles one by one, obligating the place for the lamps.

2. Connecting the electrical cables, put the lamps into the keels shelves.